img

PS-103

Power Supply Unit

The PS-103 is a dual input power supply unit 220VAC (110V
as option), 50 (60) Hz, and 24VDC to 24VDC / 8A output for
marine and industrial applications.

img

PS-103-20

Power Supply Unit

The PS-103-20 is a dual input power supply unit 220VAC
(110V as option), 50 (60) Hz, and 24VDC to 24VDC / 20A
output for marine and industrial applications.

img

BCP-136

The BCP-136 ensures 24/7 control of SB status and displays
current values of charge (discharge) current and voltage.

img

CH-105

Automatic Battery Charger

The CH-105 is a 24 VDC input automatic battery charger.
It is used to charge various types of batteries automatically,
providing a max output power of 500 W and an output to
connect load. The unit is equipped with a built-in control
and indication panel to set the charging modes and display
the storage battery status. The CH-105 can be optionally
equipped with the external control panel BCP-136. The device
has a reverse polarity protection for the main power and
storage batterries, and a current overload protection. Deep
discharge and overheat protection are optional (provided
that the thermal sensor DTS-135 is used).

img

PCH-205

Power Supply Unit & Charger

The PCH-205 power supply / automatic battery charger
is designed to operate with single-phase mains 50-60 Hz
110/220VAC and provide 24VDC to marine systems and
other industrial equipment with a total capacity of up to
1000 W. The PCH-205 charges connected storage batteries
automatically. In the case of a mains’ power failure the unit
switches the load over to the storage batteries automatically.
The PCH-205 has a built-in control and indication panel,
providing charge mode settings and battery status display.

img

DTS-135

Temperature Sensor

The DTS-135 is designed to measure current temperature of
the accumulator battery and output the measured values via
“one-wire” digital channel.