• Description

    The CH-105 is a 24 VDC input automatic battery charger. It is used to charge various types of batteries automatically, providing a max output power of 500 W and an output to connect load. The unit is equipped with a built-in control and indication panel to set the charging modes and display the storage battery status. The CH-105 can be optionally equipped with the external control panel BCP-136. The device has a reverse polarity protection for the main power and storage batterries, and a current overload protection. Deep discharge and overheat protection are optional (provided that the thermal sensor DTS-135 is used).

  • Specifications

    Input voltage, VAC, frequency 50 (60) Hz

    110 (99 to121) 1); 220 (198 to 242) 1)

    Power consumption, W

    690

    Max. output power, W

    600

    Charge voltage DC, V

    9 to 30

    Charge current, А

    0.2 to 20.0

    Rated capacity of recharged batteries, А·h

    max. 200

    Max. charge time of SB, h

    10

    Measurement error

    current, А

    ±0.2, max.

    voltage, V

    ±0.1, max.

    Accuracy ofadjustment

    current, А

    0.1

    voltage, V

    0.1

    Alarm signaling

    Built-in: relay contacts, sound signaling, light signaling;

    External (connected) devices: AU-106 or AU-206, BCP-136

    Protection degree

    IP22

    Weight, kg

    7.1

    Operating temperature, °С

    –15 to +55

    Limiting temperature, °С

    –60 to +70

    Mounting

    wall

    1) Supply voltage range is given in parenthesis.

      Built-in protection
    • reverse polarity protection
    • power loss protection
    • excessive current in AB circuit (overload / short-circuit)
    • connection of AB with reverse polarity
    • deep discharge protection (optional function)
    • overheating protection (using the DTS-135 thermal sensor)
  • Downloads
  • Support